How to Solve the Deviation of Cutting of Slitting Machine

Writer： admin Time：2020-02-04 15:35 Browse：℃

    Pearl cotton slitting machine is a kind of thin material that cuts the whole piece or roll of pearl cotton, sponge, EVA, carpet and other materials into small pieces of different sizes at the same time. It is often used in the back end of laminating machine and packaging material deep processing industry. among. Now, let's take a look at how to solve the deviation of cutting of slitting machine.

slitting machine placed at the back of the laminator

    Many users may consider the precision range of the equipment when consulting about the pearl cotton slitting machine. Regarding this issue, I would like to make the following suggestions.

    First, if the finish product is skewed during use, please check whether the left and right ends of the pressure roller are on the same horizontal line. If not, please adjust the roller to the same height.

    Second, if the pearl cotton slitting machine is in use and found that the finish product is skewed, then check whether the relative positions of the gears and racks are consistent. If they are not consistent, adjust them to be consistent.

    Third, if the finish product is skewed when slitting with the round knife, please check whether the cutting blade is sharp enough. If not, please replace the cutter with a new one to ensure that the cutter is sharp enough.

round knife of the press roller

    We must check carefully before turning on the pearl cotton slitter every day to ensure that there are no malfunctions. In the process of production and use, it is also necessary to frequently check the operating status of the equipment, and timely detect abnormalities to avoid material waste caused by deviation. The above is today's sharing, I hope to help you!