Is It Only Needs 5 Minutes to Melt the Glue

Writer： admin Time：2020-02-04 15:36 Browse：℃

    Maolong Pearl Cotton Hot Melt Glue Machine is mainly used for the gluing and bonding of pearl cotton, EVA, cardboard, sponge and other materials. Is it really to takes 5 minutes to melt the glue?

    The answer is yes, it only takes 5 minutes to melt the glue. The investigation shows that the power of the pearl cotton hot melt adhesive machine on the market is between 4,500 watts and 5,500 watts, while the power of our hot melt adhesive machine is only 1,600 watts . Therefore, its power is much smaller than others, saving power. At the same time, the aluminum plastic tank has good thermal conductivity and saves power. Taken together, the power charge saved by our pearl cotton hot melt glue machine in one year is equivalent to the expense of two hot melt glue machine. Let's take a look at the details:

    1. The full aluminum integrated glue tank of Maolong EPE Hot Melt Glue Machine is cast in all aluminnum and the aluminum mold is formed by opening the steel mold at one time.

Display picture of all aluminum glue tank 

Display picture of iron or stainless steel plastic tank on the market

    2. The Molong EPE Hot Melt Glue Machine is equipped with a non-starting device when the temperature is insufficient. The motor start indicator lights up when it is heated to a sufficient temperature. Therefore, the equipment not only has the characteristics of fast speed of energy saving and electricity saving, but also effectively protects the motor and prolongs the service life!

    3. The coating rollers and storage tanks of the Maolong Pearl Cotton Hot Melt Adhesive Machine are independently temperature controlled, and the appropriate temperature is adjusted according to the operating characteristics of the hot melt adhesive you use, so it also speed up the melting speed. For example: when the usage of glue is much, the temperature of the glue storage tank must be increased to speed up the melting. On the contrary, the temperature must be lowered to prevent the hot melt adhesive from being carbonized for a long time at high temperature, and the temperature of the adhesive with different melting points can also be adjusted appropriately.