Basic Faults and Solutions of EPE Slitting Machine

Writer： admin Time：2020-02-04 15:37 Browse：℃

    In the process of using EPE horizontal and vertical slitting machine, sometimes it is inevitable that some basic failures will occur when using the equipment. What are the normal failures and what solutions should you take?

    First, if the slitting machine can not be turned on, we first check whether the safety shield is closed in place, please adjust it if it is not closed; then check whether the power supply, air source and other components are properly installed and secure.

EPE horizontal and vertical slitting machine shield is not closed in place

Pearl cotton horizontal and vertical slitting machine cover has been closed in place

    Second, if the machine is running automatically, but the cross cutter cannot be loaded after cutting. We should first check the cross cutter cylinder, and then check whether the lower sensor switch is on. If it is not on, please adjust the position of the sensor up and down until it is on.

    Third, if the pearl cotton horizontal and vertical slitting machine is running automatically, the materials can not be cut by the round knife. We can open the safety cover of the device and check if the sipe under the round knife is raised. If it is not raised, please click the [Sipe] button on the touch screen to raise the sipe.

    Pearl cotton horizontal and vertical slitting machine is an important equipment for processing the foam materials such as epe, eva, sponge. It is recommended that daily staff check and maintain is necessary before turning on the machine. We will solve these minor faults from time to time in a timely manner. I hope the above basic faults and solutions summarized by Maolong Machinery will be hopeful to you. There may be other new glitches, you can consult our after sales service personnel.